120 GPH CENTRIFUGE w/BRASS and GAUGE for WVO /OIL and BIODIESEL

Description

120 GPH CENTRIFUGE w/BRASS and GAUGE
If you're thinking of driving on Waste Vegetable Oil, Waste Motor Oil, Transmission Fluid or any other alternative fuel , visit our Forum Library. We have gathered over 35+ forums in one place dealing with oil filtration and specific vehicles.
See videos
at Centrifuge for Dummies
The
wvo centrifuge
has the ability to clean your oil to below .5 micron while dewatering.
Specifications
Centrifuge comes with pressure gauge, 3/8" ball valve, 2 - 3/8" brass tees, 2 - 3/8" brass hose barbs, and 3/8" close nipple.
The flow rate capacity of the wvo centrifuge is 2 GPM or 120 gallons per hour. The unique design of the nozzles located on the top of the rotor make this centrifuge an excellent choice for water removal - when shut down, it is impossible for any water or contaminants to leak into your clean oil. The centrifuge measures 6" in diameter by 9" tall. Rotor is capable of holding 26 oz. of contaminants. One 55 gallon drum of WVO will take approximately 27 minutes to process. The viscosity is the critical part of this equation. Centrifuge generates at (85 PSI) a centrifugal force 2,000 times greater than gravity at 8800 RPM. You need to purchase a 1/2 HP motor with pump for centrifuge operation. The centrifuge will filter wvo, filter wmo, filter hydraulic oil, filter gear oil  or dewater biodiesel. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.You can build a wvo filtration unit with this centrifuge.
All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
Every product is warranted to the original purchaser to be free from defects in material and workmanship for a period of five years.
Bushings and shaft wear are not covered under this warranty
Returns of only unopened, unused products, 20% re-stocking fee applies.  Shipping is not refundable.  Buyer pays return shipping.
We are not responsible for international custom or VAT charges.
For all your oil filtration
needs visit us at
Pa Biodiesel Supply