-40%
960 GPH OIL CENTRIFUGE for ENGINE MOUNT or WVO /OIL and BIODIESEL
$ 1055.99
- Description
- Size Guide
Description
960 GPH OIL PRESSURE CENTRIFUGEIf you're thinking of driving on Waste Vegetable Oil, Waste Motor Oil, Transmission Fluid or any other alternative fuel , visit our Forum Library. We have gathered over 35+ forums in one place dealing with oil filtration and specific vehicles.
See videos
at Centrifuge for Dummies
The
oil centrifuge
has the ability to clean your oil to below .5 micron while dewatering.
Specifications
The flow rate capacity of the wvo
centrifuge
is 16.6gpm or 960gph The wvo centrifuge measures 13.5" in diameter by 18.5" tall. Rotor is capable of holding 202 oz. of contaminants. Centrifuge generates (at 85 PSI) a centrifugal force 2,000 times greater than gravity at 3700 RPM. You need to purchase a
5
HP motor with pump for wvo
centrifuge
operation. The wvo centrifuge will filter wvo, filter wmo, filter hydraulic oil, filter gear oil or dewater biodiesel. The centrifuge for wvo will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.
All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
Every product is warranted to the original purchaser to be free from defects in material and workmanship for a period of five years.
Bushings and shaft wear are not covered under this warranty
Call for INTERNATIONAL SHIPPING
We are not responsible for international custom or VAT charges.
For all your oil filtration
needs visit us at
Pa Biodiesel Supply