Spinner II Oil Centrifuge 960 GPH Model 600HD

Description

Spinner II
Model 600HD
960 GPH OIL PRESSURE CENTRIFUGE
The Spinner II Centrifuge is probably the best name in centrifuges. Here we have a brand new Model 600HD Centrifuge. These are brand new overstock. Before the age of the replaceable rotor, this was Spinner’s best centrifuge priced at $ 3,699.00 to $ 3,999.00.
Specifications
The flow rate capacity of the oil
centrifuge
is 16.6 gpm or 960gph.
The centrifuge measures 13.5" in diameter by 18.5" tall. Rotor is capable of holding 202 oz. of contaminants. Centrifuge generates (at 85 PSI) a centrifugal force 2,000 times greater than gravity at 3700 RPM.
The oil centrifuge has the ability to clean your oil to below .5 micron while dewatering.
You need to purchase a 5 HP motor with pump for an oil
centrifuge
operation. The oil centrifuge will filter hydraulic oil, filter gear oil, lube oil, waste motor oil or dewater biodiesel. The centrifuge for will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.
If you're thinking of driving on Waste Vegetable Oil, Waste Motor Oil, Transmission Fluid or any other alternative fuel, visit our Forum Library. We have gathered over 35+ forums in one place dealing with oil filtration and specific vehicles.
Go to www.pabiodieselsupply.com/forum.
Also, visit our oil centrifuge videos at
www.centrifugefordummies.com
Every product is warranted to the original purchaser to be free from defects in material and workmanship for a period of five years.
Bushings and shaft wear are not covered under this warranty.
Please call for International Shipping.
Not responsible for individual duties or VAT charges.
For all your filtration needs, visit us at
www.PABiodieselSupply.com