Titanium Satellite C1-PLL PLL C-Band LNBF --WiMax-WiFi 4G filter Phase Lock Loop

Description

Best Stability! Excellent Performance! High Quality Hardware!
Titanium Satellite C1 PLL
®
C-band LNBF
(3.7 - 4.2GHz)
Phase Lock Loop LNBF with WiMAX 4G LTE Wide Area WiFi Radar Interference Filter
World's first PLL C-band LNBF with WiMAX 4G LTE WiFi Radar Filter
The Titanium Satellite
C1-PLL
® features WiMax,4G LTE, wide area WiFi interference filter and the simplicity of voltage controlled polarity selection with exceptional performance and stability required for reliable reception of S2, high FEC and narrow bandwidth satellite transponders. The filter eliminates the interference caused by WiMax, 4G LTE and wide area WiFi. Soft filter with 3dB attenuation from 3.6-3.7GHz, hard elimination notch filter below 3.6GHz.
Performance
This innovative single output model is developed using the latest PLL chipsets with a balance of gain, isolation, stability and amplification to produce a Phase Look Loop C-Band LNBF that outperforms all other C-Band LNBFs. All Titanium Satellite products are factory line tested multiple times to assure specification compliance and performance. In addition, all products are inspected by an independent third party service to insure complete manufacturing and performance compliance. Any product found not to meet our exacting "A" grade requirements is either reworked and certified to "A" grade performance or destroyed. Unlike competitors, there is no 2nd market for "B" grade Titanium products!
Cool
We have all heard the comment, "Looks Aren't Everything". This statement is so true! The
C1-PLL
with the heavy cast aluminum mass and thick wall housing sports a glossy snow white color protective finish. This attractive finish with offsetting cool grey and black hardware not only looks great, but it also reduces overheating when exposed to direct sunlight. The natural color aluminum cooling fins also assist in dissipating heat from the electronics and body mass resulting in a lower operating temperature with increased performance.
Design
The craftsmanship, quality components and innovative design make the
C1PLL
superior to any C-band LNBF available on the market. The
C1-PLL
is provided with a secure fitting, Royal Blue color feedhorn cover, dielectric slab insert for circular C-band reception and mounting hardware. The included universal flat type three ring scalar is tapped for mounting on button hook, three and four leg prime focus dish designs. An optional Titanium
CS1
conical type scalar with a universal 68mm clamp is available for offset design dish mounting. All Titanium hardware is secured with the provided Allen Head type screws and key tool.
WaterProof
Titanium Satellite also introduces to C-band LNBF production the waterproof, 3GHz, blue-insert, F-fitting coax connection. After noting the cheap coax connections used on several competitor C-band LNBFs which had clinch point damage after only a few insertions, we requested the manufacturer to source a component upgrade to a 3GHz fitting. Yes, the upgraded fitting costs 10 cents more, but why go cheap?
Value
While a traditional corotor design with the mechanical polarity controller provides increased performance and fine-tuning adjustments for overcoming interference and optimizing reception, many hobbyists and satellite viewers do not wish to be bothered with the additional expense, complexity and control limitations of this traditional feedhorn design. The
C1-PLL
is a simple way to increase performance and signal reliability of your BUD (Big Ugly Dish) without breaking the bank! The low MSRP yields a solid investment in improving your C-band system performance.
Comparison
How does the
C1 PLL
perform? The
C1PLL
is setting new performance standards for next generation C-band LNBFs!
microBUD
What kind of reception is possible on a micro BUD? Check out the Titanium Satellite website for the results of a signal test of the Titanium Satellite C1-PLL C-band LNBF with the optional SC1 Conical Scalar mounted on a 1.2M micro BUD. What is a micro BUD? A micro BUD is usually considered to be an undersized satellite dish that is smaller than the normal 8 - 10 foot C-band dish. In this test the dish was a 4 foot GEOSATpro aimed at Galaxy 16 @ 99w. We were able to lock four additional transponders and increase the CN on all transponders!
Important Notice:
Titanium Satellite is the developer of the world's first PLL LNBFs. Don't be fooled by imitations, clones and copycats with their inferior performance. These copied products may carry our trademark C1 PLL and C2 PLL model names, but they are not the original Titanium Satellite products and are not licensed or authorized by Titanium Satellite for production or distribution. The C1PLL and C2PLL LNBFs not displaying the Titanium Satellite mark infringe on our intellectual development, trademarks and proprietary designs. If you have been fooled into buying a C-band PLL clone, please immediately contact us and we will let you know how easy it is to exchange it for a genuine Titanium Satellite PLL product.
C1-PLL
Specifications
Input Frequency Range
3.70 ~ 4.20GHz
Output Frequency Range
950 ~ 1450MHz
L.O. Frequency
5150MHz
Noise Temperature
15K typical
LO Stability (over temp ex offset)
± 50Khz
/
± 10Khz at operational temperature
LO Phase Noise @ 1Khz
-72dBc
LO Phase Noise @ 10Khz
-81dBc
LO Phase Noise @ 100Khz
-90dBc
Conversion Gain
65dB typical
Gain Flatness
±4dB
Gain Variation
±1dB / 27 MHz
Image Rejection
-45dB
Crosstalk Isolation
20dB typical
Control Signals Ca [V/CR]
11.5 ? 14.0V
Control Signals Cb [ H/CL]
16.0 ? 20.0V
DC Voltage
11 ~ 20Vdc
Current
145mA [max]
Output VSWR
2.0 : 1
Temperature Range
-22 ~ +140°F / -40 ~ +60°C
Relative Humidity
0 ?100% condensing
Polarization Type (cast ±45° scale)
Linear (w/dielectric for circular)
Output Impedance
75?
Connection
F-Type / 3GHz / Female
Weight
10.1oz / 286g
Construction
Precision Cast Aluminum
Hardware
Stainless Steel Allen Head (w/tool)
Housing / Scalar Finish
Polyurethane Powder (chip resistant)
Color
Snow White / Natural Cooling Fin
Feedhorn Cover
RF Low-loss (blue color)
Dimensions (w/o scalar)
7? (l) x 4? (h) x 2¾ (w) in 185 (l) x 87 (h) x 68 (w) mm
Scalar Type *
Flat - Prime Focus, 3 Ring
F/D with included Flat Scalar
0.32 ? .44+ (cast scale)
Mount Type with Flat Scalar
Single pole, Tripod or Quad legs
* Optional Conical Scalar Kit ? SC1
Offset Type Dish with F/D .5 ? .8
The C1-PLL ®, C2-PLL ®, C1WPLL and C2WPLL logos are trademarks of Titanium Satellite